Skip to main content

Notifications

Announcements

🌸 Community Spring Festival 2025 Challenge & Updates🌸
News and Announcements icon
Community site session details

Community site session details

Session Id :
Dynamics 365 Community / Forums / Supply chain | Supply Chain Management, Commerce / Item Tracing not drill...
Supply chain | Supply Chain Management, Commerce
Answered

Item Tracing not drilling down in production Orders

(4) ShareShare
ReportReport
Posted on by Fernando Villamán U. 36
Hello experts!
 
I am running an item tracing for some item batches and the trace is stopping when it reaches a production Order line. As you can see the last 2 items have a batch and I can start a trace from these lines in the trace, but I cannot see the detail below.
 
 
When I start the trace from Node, I can correctly see all the data related to the tracing of the nodes that are below the production Order Lines
 
If I run this on a contoso environment it goes below the production order lines level. Does anyone knows what could be the reason why my tracing stops at the production order line level?
 
 
 
 
Is this the reason I am not seeing the data below the Production Order line?
 
Thanks in advance
 
 
Categories:
Dynamics 365 Supply Chain Management
  • Verified answer
    Fernando Villamán U. Profile Picture
    Fernando Villamán U. 36 on at
    Item Tracing not drilling down in production Orders
    Hi, we are investigating with Microsoft , it seems its a data issue. Thanks everyone for your replies.
  • Saif Ali Sabri Profile Picture
    Saif Ali Sabri 1,827 Super User 2025 Season 1 on at
    Item Tracing not drilling down in production Orders


    @Vahid Ghafarpour – Please include his comments as well.

    Still need help?
    If your question or problem remains unresolved, share details below so our community can assist further. Include steps you’ve tried, error messages, or screenshots for faster support.
     

  • Vahid Ghafarpour Profile Picture
    Vahid Ghafarpour 9,694 Super User 2025 Season 1 on at
    Item Tracing not drilling down in production Orders
    If any of the responses helped resolve your issue, please take a moment to mark the best answer. This helps others in the community quickly find solutions to similar problems.

    To do this, simply click the "Does this answer your question?" button on the most helpful response and like the helpful posts. If your issue is still unresolved, feel free to provide more details so the community can assist further!

    Thanks for being an active part of the Dynamics 365 Community! 😊
  • Jonas "Jones" Melgaard Profile Picture
    Jonas "Jones" Melgaard 3,435 Super User 2025 Season 1 on at
    Item Tracing not drilling down in production Orders
    Do you have circularity in the formula? I have seen the tracer doing funny things if there is circularity in the formula's (I.e. you are producing soap, but some of the final product is a part of the formula to act as a catalyst).
  • Suggested answer
    Saif Ali Sabri Profile Picture
    Saif Ali Sabri 1,827 Super User 2025 Season 1 on at
    Item Tracing not drilling down in production Orders
    The issue you are experiencing—where Item Tracing stops at the Production Order Line level—is likely due to tracing setup or system configuration differences between your environment and the Contoso demo environment. Based on the information you provided, here’s how you can troubleshoot and resolve the issue:

    Possible Causes and Solutions

    1. Verify Item Tracing Configuration

    In your environment, ensure that Item Tracing is correctly set up to allow full drill-down:
    • Navigate to Inventory Management > Setup > Item Tracing Parameters
    • Check that all tracking dimensions (batch, serial, site, warehouse, license plate) are properly enabled for tracing.

    2. Check the BOM or Formula Structure

    Item tracing can go one level up or down in the BOM or formula structure, as mentioned in the documentation:
    "You can trace one level up or down in a BOM or formula. If you trace raw materials, you see the finished product and co-products. However, tracing a co-product does not include the finished product."
    • If your raw material is used in a multi-level BOM, verify that the lower-level production orders are correctly linked.
    • Ensure that co-products and by-products are properly included in the BOM structure if applicable.

    3. Check Production Order Status

    • If the Production Order is not ended, the system might not fully trace consumption.
    • Go to Production Control > All Production Orders and ensure that the status is at least Reported as Finished or Ended.

    4. Validate Inventory Transactions & Dimensions

    • Navigate to Inventory Management > Inquiries and Reports > Tracking Dimensions > Batches
    • Ensure that the batch and serial numbers match between production consumption and output transactions.
    • If transactions are missing, try running inventory recalculation from Cost Management > Inventory Closing and Adjustment.

    5. Verify ‘Trace from Node’ Behavior

    Since you mentioned that using “Trace from Node” correctly displays the data, this indicates that the data exists but is not automatically retrieved in the initial trace.
    • This could be due to missing or incorrect tracing configuration or data visibility settings in your environment.
    • Try running the trace with different filter settings, ensuring no restrictive criteria are limiting the results.

    Final Recommendation

    If your Contoso environment works as expected, but your live/test environment does not:
    • Compare Item Tracing settings between the two environments.
    • Verify that production order statuses and inventory transactions are correctly recorded.
    • Ensure tracking dimensions (batch, serial, license plate) are properly assigned and posted.
    • If the issue persists, try running database synchronization to update inventory transactions.

Under review

Thank you for your reply! To ensure a great experience for everyone, your content is awaiting approval by our Community Managers. Please check back later.

Helpful resources

News and Announcements

🌸 Community Spring Festival 2025 Challenge & Updates🌸

Quick Links

🌸 Community Spring Festival 2025 Challenge 🌸

WIN Power Platform Community Conference 2025 tickets!

Jonas ”Jones” Melgaard – Community Spotlight

We are honored to recognize Jonas "Jones" Melgaard as our April 2025…

Kudos to the March Top 10 Community Stars!

Thanks for all your good work in the Community!

Leaderboard

#1
André Arnaud de Calavon Profile Picture

André Arnaud de Cal... 294,118 Super User 2025 Season 1

#2
Martin Dráb Profile Picture

Martin Dráb 232,866 Most Valuable Professional

#3
nmaenpaa Profile Picture

nmaenpaa 101,158 Moderator

Leaderboard

Featured topics

Product updates

Dynamics 365 release plans